Every photo below is a job we actually did, in a home across Metro Atlanta. No stock images, no manufacturer catalogue shots — just before, after, and what was wrong in between.
Sixteen recent jobs across Metro Atlanta — what the customer called about, what we did, and the parts we used.
The homeowner called after hearing a loud bang and finding the garage door would no longer open. We replaced both broken torsion springs with high-cycle springs, balanced the door, inspected the cables and bearings, and completed a full safety inspection before returning the door to smooth operation.
One of the lift cables snapped on a commercial garage door, leaving it crooked and unsafe to operate. We replaced both lift cables, inspected the drums and bearings, adjusted the spring tension, and tested the entire system to confirm safe, reliable performance.
The customer wanted a quieter, better insulated garage door for early morning departures. We installed premium nylon rollers, replaced worn hinges, lubricated all moving parts, adjusted the spring balance, and significantly reduced operating noise.
Removed an old builder-grade garage door and installed a new insulated steel door. The project included new tracks, torsion springs, weather seals, and professional balancing for smooth, reliable performance.
A local business experienced downtime after a commercial overhead door stopped operating. We replaced damaged rollers, adjusted the spring tension, serviced the operator, and restored the door to full working condition the same day.
Installed a new LiftMaster Wi-Fi garage door opener with smartphone control through the myQ app. The homeowner now has quieter operation, battery backup for power outages, LED lighting, and remote access from anywhere.
The garage door was shaking and making excessive noise during operation. We replaced all worn rollers with premium sealed nylon rollers, lubricated the hardware, tightened loose bolts, and restored quiet, smooth movement.
Performed a complete preventive maintenance service including lubrication, spring adjustment, hardware tightening, safety sensor testing, opener inspection, and balance testing to keep the garage door operating like new.
Responded to an emergency service call after the garage door became stuck halfway open late in the evening. We diagnosed a serious off-track failure, completed the repair on site, and restored safe operation before leaving.
Converted an outdated extension spring system to a safer torsion spring setup. The new system provides improved balance, smoother movement, longer spring life, and increased safety.
Removed an unreliable garage door opener and installed a new LiftMaster quiet operation system with Wi-Fi connectivity, battery backup, and smartphone controls for dependable everyday use.
One of the garage door cables came off the drum, preventing the homeowner from leaving for work. We replaced both cables, inspected all lifting components, balanced the door, and completed a full safety inspection.
The homeowner was unable to lift the garage door after two of the torsion springs snapped overnight. We installed four new high-cycle torsion springs, balanced the door, inspected the cables and bearings, and completed a full safety check.
Installed a new insulated steel garage door with windows to replace an outdated wooden door. The project included new tracks, heavy-duty torsion springs, weather seals, and a complete system calibration to improve curb appeal and energy efficiency.
A vehicle had backed into the door, damaging two of the lower sections. The rest of the door was sound and the sections were still available, so a full replacement wasn't necessary. We replaced the two damaged panels, realigned the tracks, adjusted the spring tension back to spec, then cycle-tested the door and checked the safety reverse.
Installed a new LiftMaster wall-mounted garage door opener to replace an aging ceiling-mounted unit. We also upgraded the door with premium sealed nylon rollers, adjusted the spring balance, lubricated all moving components, and programmed the homeowner's remotes, wireless keypad and myQ smart app. The jackshaft opener created additional overhead storage space while providing quieter, smoother operation.
We photograph as much of our work as customers are happy for us to share. These are the jobs that come up week in, week out.
Same-day service across Metro Atlanta, with a technician typically at your door within two hours. Book online to save 10%, or call now.
Recent work across Atlanta, Alpharetta, Buckhead, Cumming, Duluth, Dunwoody, Fairburn, Johns Creek, Lawrenceville, Mableton, Roswell, Sandy Springs, Smyrna, Snellville, Suwanee and Tucker.
